EXCAVATOR

Energy saving and environmental protection

The positive flow double proportional valve control system is used to control the flow of the main pump according to the actual working conditions, so as to give full play to the diesel engine power and reduce the power loss of the whole hydraulic system;

At the same time, the pressure loss of the hydraulic system is further reduced, both of which can save 10% energy;

Mine specific design

A number of mine specific designs, including strengthening structural parts, standard oil bath pre filtration, further improving the performance of the whole radiator and hydraulic cleanliness, are more applicable to the mine;

parameter

1. High performance and low fuel consumption In similar applications, the excavator's fuel consumption is reduced by as much as 20%. Use the power mode to match the excavator to the operation; and use the intelligent mode to automatically match the engine and hydraulic power to your excavation conditions.

2. Lower maintenance cost , Is expected to reduce maintenance costs by up to 15%. All daily maintenance work can be performed on the ground.

3. Stable and reliable, trustworthy Without derating the rated power, the working altitude is up to 3000 m (9840'). It can work in high temperature environments up to 52 °C (125º F), and its cold start capability is as low as -32 °C (–25º F).

4. Work safely every day and go home safely All daily maintenance points are accessible on the ground — no need to climb to the top of the excavator. Protect your excavator with an operator ID. Use the PIN code on the monitor to enable the button activation function.

5. Simple operation Start the engine at the push of a button; use a Bluetooth key card, smartphone application or unique operator ID function.

6. Comfortable work The comfortable cab is equipped with large seats that can be flexibly adjusted to suit operators of all sizes. The control devices within easy reach are located in front of the operator, making it convenient for the operator to control the excavator comfortably.

TIANJIN COMMAND MACHINERY MANUFACTURING CO.,LTD Thank you for your attention and support!

    Our company specializes in the production of water well drilling rigs (rotary table, power head), which can meet the requirements of technology: 1 positive mud circulation, 2 reverse mud circulation, 3 air DTH hammer, 4 air lift reverse circulation (without complete crushing, improve drilling efficiency), 5 Hydraulic DTH hammer (without air compressor), engineering drilling rig, agricultural machinery and other mechanical equipment. Committed to providing users with the most suitable equipment for practical use, and has strong design capabilities. Individual product customization can be implemented without any additional charges. We insist on comparing with similar products at home and abroad, and always ensure the advanced nature of our products.

    A good product is not necessarily the most technological and advanced, but it must be the most in line with the actual needs. To make this product, we can not rely solely on designers. We know this well, so we have two groups of design teams for the product. A group of after-sales engineers with more than 30 years of domestic and foreign construction experience, and a group of designers with rich working experience graduated from well-known colleges and universities, which are based on professional division of labor (mechanical design and manufacturing and automation, material forming, mechanical and electronic engineering, manufacturing engineering, etc.). We will combine the rich practical construction experience and the most top professional theoretical knowledge to meet your various needs.

    We are not only familiar with the products, but also familiar with the human environment, construction environment and stratum of domestic and foreign construction areas. We can provide you with all-round product selection suggestions and product customization. To provide you with the greatest technical support to help your cause take off.