EXCAVATOR

Energy saving and environmental protection

The positive flow double proportional valve control system is used to control the flow of the main pump according to the actual working conditions, so as to give full play to the diesel engine power and reduce the power loss of the whole hydraulic system;

At the same time, the pressure loss of the hydraulic system is further reduced, both of which can save 10% energy;

Mine specific design

A number of mine specific designs, including strengthening structural parts, standard oil bath pre filtration, further improving the performance of the whole radiator and hydraulic cleanliness, are more applicable to the mine;

parameter

Specification: total weight: 36000kg, bucket capacity: 1.6-2.32m3

Engine model: gh-6hk1xksc rated power: 212kw / 2000rpm

Large torque: 1080nm / 1500rpm displacement: 7.79l

Performance: travel speed: 5.5/3.5km/h, rotation speed: 9.5rpm

Climbing capacity: 70% (35 °) ground specific pressure: 65kpa

Bucket digging force: 235kn stick digging force: 180kn

Number of track shoes of traveling part: 49, each side of carrier roller: 2

Each side of roller: 9 standard track: 600mm

Oil and coolant capacity fuel tank: 690l hydraulic tank: 380L

Engine oil: 36L radiator: 12.3l

Final drive: 2 × 8.5l

TIANJIN COMMAND MACHINERY MANUFACTURING CO.,LTD Thank you for your attention and support!

    Our company specializes in the production of water well drilling rigs (rotary table, power head), which can meet the requirements of technology: 1 positive mud circulation, 2 reverse mud circulation, 3 air DTH hammer, 4 air lift reverse circulation (without complete crushing, improve drilling efficiency), 5 Hydraulic DTH hammer (without air compressor), engineering drilling rig, agricultural machinery and other mechanical equipment. Committed to providing users with the most suitable equipment for practical use, and has strong design capabilities. Individual product customization can be implemented without any additional charges. We insist on comparing with similar products at home and abroad, and always ensure the advanced nature of our products.

    A good product is not necessarily the most technological and advanced, but it must be the most in line with the actual needs. To make this product, we can not rely solely on designers. We know this well, so we have two groups of design teams for the product. A group of after-sales engineers with more than 30 years of domestic and foreign construction experience, and a group of designers with rich working experience graduated from well-known colleges and universities, which are based on professional division of labor (mechanical design and manufacturing and automation, material forming, mechanical and electronic engineering, manufacturing engineering, etc.). We will combine the rich practical construction experience and the most top professional theoretical knowledge to meet your various needs.

    We are not only familiar with the products, but also familiar with the human environment, construction environment and stratum of domestic and foreign construction areas. We can provide you with all-round product selection suggestions and product customization. To provide you with the greatest technical support to help your cause take off.